QO-100 Ground Station
Hardware
- Pluto+ SDR Transceiver
- Analogue Devices CN0417 pre-amplifier (1W)
- SG Labs 2.4GHz v3 Power Amplifier (20W)
- 100 cm offset dish
- Diavolo Twin LNB, modified for an external clock reference
- Ice Cone Helix antenna with 2.2 turns
- Leo Bodnar Mini GPSDOs as 40 MHz clock reference for the Pluto+ (TX)
- Leo Bodnar Mini GPSDOs as 25 MHz clock reference for the LNB (RX)
Software
The SDR software I am using for QO-100 is the AMSAT-DL QO-100 Linux Transceiver by DJ0ABR running on Debian Linux.
Diagram
Pictures
Screenshot of the AMSAT-DL QO-100 Linux Transceiver:
The 80cm dish with the Diavolo Twin LNB and the 2.2 turn helix antenna:
What once started quite clean and tidy...
.. has evolved to this:
Shortwave Station
On HF I am mostly QRV with the following setup:
Hardware
- Hermes Lite 2 SDR transceiver
- Hardrock-50 amplifier with 50W output power
- LDG AT-200 Pro automatic antenna tuner
- Self-built Hermes Lite 2 to Hardrock-50 interface
- DM4DS MIDI Box SDR Controller
Software
- Quisk, a Software Defined Radio Software running on Debian Linux
Antennas
- Hustler 4-BTV vertical antenna (40m)
- Cobweb Antenna at 9m above ground (6 to 20m)
Diagram
